Publicidad
Idiomas disponibles
Idiomas disponibles
5. Press Multi tab again and again to change the setting.
6. Press on/off button to deactivate the appliance and to confirm the setting.
ADDING SALT
Before first use put one litre of water in the salt container.
Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after
you fill the salt container, start a programme.
ADDING RINSE AID
The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot
rinse phase.
DAILY USE
1. Open the water tap.
2. Set the correct programme for the type of load
and the degree of soil.
Make sure that the appliance is in Programme
selection mode.
•
If the salt indicator is on, fill the salt
container.
ADDING DETERGENT
If the programme has a prewash phase, put a small quantity of detergent also in compartment B.
8
2
1
1
2
•
If the rinse aid indicator is on, fill the rinse
aid dispenser.
3. Load the baskets.
4. Add the detergent. If you use multi-tablets,
activate the option Multi Tab.
5. Start the programme.
A
B
1
2
Publicidad
