geberit FLOWFIT Instrucciones De Uso página 33

Maintenance
interval
Regularly, every
6 months
Disposal
Disposal of Geberit pressing jaws
Geberit pressing jaws are made of steel. Therefore, Geberit
pressing jaws that are no longer in use do not belong in non-
recyclable waste. They must be directly returned to Geberit for
proper disposal or sent to a local collection point for scrap metal.
Conformity
Declaration of conformity for Geberit pressing
jaws
Geberit pressing jaws are part of a system and do not have their
own declaration of conformity. The relevant declarations of
conformity are included with the pressing tools.
Person in charge of documentation
Jörg Schneider, Product Compliance, Geberit International AG,
8645 Jona, Switzerland
9007212209767563 © 01-2024
972.178.00.0(00)
Maintenance work
▶ Check the Geberit FlowFit pressing jaw
using the Geberit FlowFit PowerTest to
ensure that the distance between the
pressing tips is permitted and that enough
pressing force is provided. If defects are
found during the inspection, the pressing
jaw must be replaced.
EN
2 / 2
33