Descargar Imprimir esta página

Carrera RC Nintendo Mario Kart Mini RC Mario-Gold Instrucciones De Montaje Y De Servicio página 7

Ocultar thumbs Ver también para Nintendo Mario Kart Mini RC Mario-Gold:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13
• Increase the separation between the product and receiver.
• Connect the product into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IC statement
The device contain license-exempt transmitter(s)/ receiver(s) that
comply with Innovation, Science and Economic Development
Canada's licence-exempt RSS(s). Operation is subject to the
following two conditions:
1. The device must not cause interference;
2. The device must accept any interference, including interference that
may cause undesired operation of the device.
CAN ICES-3 (B)/NMB-3(B)
Safety instructions
The Carrera RC vehicle is designed for hobby use only and
A
may only be operated on tracks and in spaces especially in-
tended for this purpose. WARNING! Do not use the Carrera RC
vehicle in road traffic.
Never operate the product on grass surfaces. Do not use the
B
Carrera RC vehicle for transporting goods, persons or animals.
Never use the Carrera RC vehicle outdoors during rain or
C
snowfall. The car must not be run through water, puddles and
snow, and must always be kept stored in a dry place.
Avoid running on courses which are laid exclusively with sand.
D
Do not expose the Carrera RC vehicle to direct sunlight.
E
ENGLISH
Never subject the Carrera car to repeated changes of load –
F
that means continuously reversing it.
Never throw the car on the floor from a standing position.
G
The Carrera RC vehicle must be inspected before and after
H
operation, each time it is used, to ensure that it has not be-
come disassembled. Any screws or nuts that may have be-
come loosened during operation must be tightened.
Contents of package
1 x Carrera RC Vehicle
1
1 x Controller
1 x USB charger cable
1 x Set of batteries (non-rechargeable)
Charging the rechargeable battery via computer
This toy (vehicle) contains batteries that are non-replaceable.
2
Take care only to charge the LiPo battery supplied with the LiPo
charging unit (USB charger cable) also supplied. If you attempt to re-
charge the battery with any other LiPo battery charger or any other
type of charger, this may result in serious damage.
read the previous chapter with warnings and guidelines on the
usage of rechargeable batteries before proceeding.
charge the rechargeable battery with the respective USB charger ca-
ble from a computer USB port (USB 3.0) or a USB power supply unit
with at least 1A output voltage:
• Connect the USB charging cable with the USB port of a computer.
The LED on the USB charger cable lights green indicating that the
7
Please carefully
You can re-

Publicidad

loading