Publicidad
Idiomas disponibles
Idiomas disponibles
2.2 ENERGY SAVING TIPS
•
The appliance should be located
in the coolest area of the room,
away from heat producing
appliances or heating ducts, and
out of the direct sunlight.
•
Let hot foods cool to room
temperature before placing in
the appliance. Overloading the
appliance forces the compressor
to run longer. Foods that freeze
too slowly may lose quality, or
spoil.
•
Be sure to wrap foods properly,
and wipe containers dry before
placing them in the appliance.
This cuts down on frost build-up
inside the appliance.
•
Appliance storage bin should not
be lined with aluminum foil, wax
paper, or paper toweling.Liners
interfere with cold air circulation,
making the appliance less
•
Organize and label food to reduce
door openings and extended
searches.Remove as many items
as needed at one time, and close
the door as soon as possible.
2.3 CHANGING THE LIGHT
•
Any replacement or maintenance
of the LED lamps is intended to
be made by the manufacturer, its
person.
•
Light source in this product is
engineers.
1. Please take out the plug before
removal.
2. Remove the lampshade with a
screwdriver.
3. Take down the lamp panel.
4. Remove the connection terminal.
2.4 START TO USE
•
Before initial start, keep the
refrigerator still for two hours
before connecting it to power
supply.
•
Before placing any fresh or frozen
foods, the refrigerator should
have run for 2 - 3 hours, or for
above 4 hours in summer when
the ambient temperature is high.
NOTE
This product is not recommended for use
with sockets or main switch with the A/
GFCI function, otherwise it may cause
false tripping.
1. it's not pose a safety risk when tripped.
2. If tripping persists, it is recommended
to replace the sockets or main switch
without A/GFCI function.
12
V.1
Publicidad
