Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
specifications of the product may be
changed without prior notice to improve
the quality of the product. The application
and technical specifications of the product
may differ from the related energy
efficiency tests or the test reports related,
etc.
ASSEMBLY AND INSTALLATION
The installation of electrical
connections must be carried
out exclusively by authorized
and qualified professionals.
Turn off the electricity before
the
washing
installed. If electricity is not
disconnected it may lead to
electrical shock or death.
For safety reasons: do not use
extension cables, or power
strips
Under no circumstances cut or
remove the earth wire.
Before
using
this
the packaging and visually inspect the
product. If you think the appliance could be
damaged, please contact the selling point
where you purchased it.
• The
manufacturer
responsible for any damages caused by
an incorrect installation.
• Two or more people are needed to install
or move this appliance. Otherwise there
is the risk of physical injuries.
• Before using the product for the first
time remove the protective layer on all
the parts.
• Make sure the voltage of the room in
which the appliance is going to be
installed matches the voltage indicated
in the plate of the appliance where you
can find the main features, and also
that the socket is correctly earth wired.
• Use exclusively the parts supplied or
original replacement hoses.
• The assembly and installation must
66
machine
with
this
appliance.
appliance,
remove
will
not
be carried out by a qualified technician
who will be responsible for the correct
operation of the appliance in the
designated place where it has been
installed.
• Keep the area where the washing
machine
damages caused by cockroaches or any
other plague will not be covered by the
warranty.
Transport bolts: The washing
machines have bolts fixed to
prevent
during the transport.
Removing the transport bolts (image 03 on
is
page 5):
• 4 bolts are fixed to the washing machine
to prevent any damage during transit.
• Before using the washing machine,
remove the bolts. If the bolts are not
removed there will be violent vibrations,
noise and other problems.
• Use the spanner included to loosen the
4 bolts.
• Turn slightly the rubber on the bolts
and then pull. Save the bolts and the
spanner.
• The bolts must be fixed again to the
washing machine if you are going to
transport it somewhere else)
• Use the plugs included to seal the holes
be
where the bolts were fixed.
Installation
Requires for positions:
• Horizontal Adjustment: The angle of
inclination must be less than 1 degree.
• Power outlet: The distance between
either side of the washing machine and
the outlet should be 1.5 meters. Do not
use too many electrical appliances on a
single outlet.
• Enviroment cleaning: It is necessary to
clean the wall, door and floor. Install the
washing machine on a stable floor with
a drain nearby. Do not place laundry
or other items on top of the washing
machine; otherwise, it may affect the
machine's functionality.
is
installed
clean.
internal
Any
damages
Publicidad
