Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
between 0.85 m - 1.25 m from the floor.
• If the drainpipe is too long, do not
force it to insert it into the washer, as
this will cause an abnormal noise.
Horizontal adjustment (see picture 09
on page 6):
• To avoid noise and vibrations, adjust
the position of the washing machine.
Preferably, place it in the corner of the
room.
• If the floor is not levelled, straighten
the
washing
adjustable legs. Do not place pieces
of wood. Make sure that all four legs
touch the floor firmly and that the
washing
machine
levelled.
Adjusting adjustable legs (see picture
09 on page 6):
• Adjust the adjustable legs to ensure
that the washing machine is balanced.
After the legs have been correctly
positioned, screw them in place for
safety. Do not place the washing
machine on a platform that is higher
than the floor, to prevent the machine
from falling.
Diagonal check:
• Make sure the washing machine does
not shake by applying downward
force on the diagonal. Both diagonals
should be checked, and if the washer
is unstable (shaking), the adjustable
feet should be readjusted.
USING THE APPLIANCE
This appliance has been designed
exclusively for domestic use.
• Never use the appliance for anything
other than the purpose it is intended to.
• The appliance has undergone strict in-
process tests and inspections under
normal operation conditions. Some
water marks might remain in the
appliance. These marks will disappear
after the first use.
68
machine
with
is
completely
• The appliance must not be used by
children, or people lacking the pertinent
knowledge about the correct use.
• Consider
recommendations about the operation.
Exceeding
capacity
operation of the unit.
• A small amount of detergent will be
enough for light or normal soil level.
Consider the dosage recommendation
provided by the manufacturer.
• Keep in mind that water pressure can
the
affect the normal operation of the
product, whether it is high or low.
Before the first use
• Remove all the plastic packaging and
any other packaging items
• Take
out
accessories supplied from the drum.
• Adjust the levelling feet so that the
product is completely levelled.
• As mentioned in the assembly and
installation
transport bolts from the back part.
• Note: Keep in mind that some water
may be drained during the first use. If
there is some residual water after the
performance test, this is something
normal.
Control panel (see picture 10 on page 6
22.
Proram knob: Select the program
according to the type and soiling level
of the laundry.
23.
Temperature
Revolutions indicator lights.
24.
Screen.
25.
On/Off button : Turn on/off. When
the procedure is finished, press the
On/Off button to cut off the power
26.
Delayed start and lock button:
Details of these functions can be
found below.
27.
Start/Pause button: Press to start
the washing machine. Press to pause
and press again to start it again.
28.
Temperature
water temperature according to the
the
manufacturer´s
the
maximum
may
affect
the
all
the
objects
section,
remove
indicator
button:
loading
correct
and/or
the
)
lights.
Select
Publicidad
