Multiblitz PROFILUX 200 Instrucciones De Uso página 8

Thank you for choosing MULTIBLITZ, we hope you enjoy working with this
high quality product.
MULTIBLITZ flash units are without exception designed and manufactured
in Germany.
CAUTION!
Please read the instruction manual carefully
before using this product.
Flash-/ and halogen tubes as well as metal
parts can become very warm during opera-
tion and may cause burns if not handled
properly.
Opening the unit could be extremely dange-
rous! Do not open the unit by yourself!
Service should only be executed by an
authorized MULTIBLITZ service location.
Do not obstruct the venting slots.
Do not place filters, diffusing materials, or
any other obstructions directly onto the
flash-/ and halogen tubes.
Do not expose the unit to water, nor spray-/
or dripping water.
Do not run the unit with unregulated gaso-
line-/ or diesel generators.
When permanently in use, this unit should
be serviced once a year by an authorized
MULTIBLITZ service location.
The crossed out wheeled bin
label that can be found on
your product indicates that
this product should not be dis-
posed of via the normal house-
hold waste stream. To prevent
possible harm to the environment or human
health please separate this product from
other waste streams to ensure that it can be
recycled in an environmentally sound man-
ner. For more details on available collection
facilities please contact your local govern-
ment office or the retailer where you
purchased this product.
Operating Instructions
PROFILUX 200 - 400 - 600
Caution:
Be sure to form the flash capacitors before
first use of the equipment as well as after every
three month of storage.
To do this, proceed as follows:
1. Switch unit on.
2. Set unit for full power (1/1).
3. Do NOT fire any flashes!!!
4. Leave unit in this condition for one hour.
5. Do NOT turn on the modeling light.
The capacitors are formed after one hour, and
the unit may be used.
1. Basic outfit
Flash unit with plug-in flash tube, halogen mo-
deling tube with B 15 d base, power cable, sync
cable, protective globe and spare fuse.
2. Accessories
Various interchangeable reflectors, folding re-
flectors, honeycomb filters, umbrellas, barn
doors, snoot, Fresnel-lens attachment, stands.
(See system diagram on back.)
3. Design
The units have a 5/8in. socket (11) with clamp
(16), which fits all lighting stands with a 5/8in.
stud. Stands without such a stud need an
MA-151 adapter. After loosening lever (10),
the unit can be tilted up or down using handle
(2). To lock the unit, turn the adjustable lever
(10) clockwise.
4. Preparing for operation
Insert halogen tube, making sure it is properly
seated (see item 12 of these instructions). Plug
the power cable into socket (8) at the bottom of
the unit, and connect it to a wall outlet. Switch
unit on with the red master switch (6); the red
LED (5) above master switch (6) lights up. While
the flash is charging, the LED (15) will glow very
5