Descargar Imprimir esta página

universalblue UVT1365-23 Manual De Instrucciones página 30

Ventilador de techo

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
agent or similarly qualified
persons in order to avoid a
hazard.
If the fan is not working
properly, contact a qualified
technician for examination
and repair. Never attempt to
dismantle the fan yourself.
To avoid personal injury or
damage to the fan and other
items,
be
working around or cleaning
the fan.
Do not use abrasive cleaners,
water or detergent when
cleaning
blades. A dry dust cloth or
lightly dampened cloth will
be suitable for most cleaning.
Due to the natural motion of
the fan, some connections
may become loose. Check the
connections at least twice
a year, and if they are loose,
tighten them.
To uninstall the product, it is
recommended to contact a
qualified electrician.
NOTE: The important safety
precautions and instructions
appearing in the manual
are not meant to cover all
possible
situations that may occur.
It must be understood that
common sense and caution
are necessary factors in the
installation and operation of
30
cautious
when
the
fan
or
conditions
this fan
PRODUCT FEATURES
The package contains the following items,
besides this manual and the product
warranty. See pictures 01 on page 4.
Note: The picture is for reference only. The
content may vary depending on the model.
1. Receiver support
2. Top cover
3. Downrod
4. Bottom cover
5. Fan body (motor and blades)
6. LED light plate
7. Lamp cover
8. Remote control and receiver
9. Assembly and installation screws
and washers.
fan
You can check the product features in table
01 on page 11.
ASSEMBLY AND INSTALLATION
Before unpacking the product, memorize
the position of each accessory in case you
need to repack it in the future.
If you notice any type of damage or
malfunctioning, get in touch with the seller
• The manufacturer will not be held
accountable for any damage caused by
an incorrect installation.
• Remove all protective sheets and
adhesive tape before using it for the
first time.
• Put all the product parts on a soft
surface, for example a carpet, or help
yourself with the packaging, to prevent
and
dents or scratches.
your home. See picture 02 on page 5.
.
Before installing the appliance,
make sure that the appliance
is unplugged from the mains.
Also disconnect the electrical
current from the installation of

Publicidad

loading