Tabla De Contenido; General Information; Product Description - Favero Electronics FOS2 Manual De Uso

ENGLISH
ENGLISH
FOS2 Radio Receiver
Table of contents
1. General information............................................... 2
2. Installing the Radio Receiver................................. 3
3. Connecting and testing the Radio Receiver............ 4
1. G
ENERAL INFORMATION
1.1. Purpose
This manual provides the necessary information for the correct use of FOS2 Radio Receiver (art. 302-02), also
indicated "Radio Receiver" in this document. We suggest you keep the manual for the duration of the product's
life.
1.2.

Product description

The Radio Receiver allows the wireless connection of the control consoles to the scoreboards.
1.3. Symbols used in the manual
Portions of the text which are of particular importance in regards to the safety or proper use of the product are
indicated by the following symbols.
Warning: risk of danger or injury to persons if instructions or the necessary precautions are not followed.
Caution: situations that could cause damage to your device or other equipment
Note: important information on product use.
1.4. Technical features
Relative humidity (without condensation) storage:
1.5. Safety warning
• It is absolutely mandatory that the installation of the product and the electrical system are designed and
implemented by qualified technicians, in compliance with regulations in effect in the country where installation
takes place.
• The opening of the case and the configuration of the product must be carried out only by a qualified technician.
• Do not crush, pull, bend, excessively twist or modify the power supply cable. Also, do not use the power cable if
it has been damaged.
00302-M01-03-ML - FOS2 Radio Receiver Installation Manual
Supply: 24V
Temperature storage: -40 ... +85°C
operating: -10 ... +50°C
operating:
Altitude storage:
operating:
Relay RL1 output: clean contact, normally open (NO), max 230V
Battery for the internal clock: lithium battery, BR2032, 190mAh, 3V, 15-year average life expectancy
Size (Width x Height x Depth): 16 x 12 x 8 cm
Weight: 1 kg
4. Configuration Dip-switches.................................... 5
5. Signaling LEDs..................................................... 5
6. Connection Type Indication.................................... 6
7. Problem solving.................................................... 6
, 0.6A
DC
5 ... 95%
10 ... 90%
12000m
2000m
2 / 26
(art.302-02)
, 5A
AC
F E
AVERO LECTRONICS SRL