Publicidad
Idiomas disponibles
Idiomas disponibles
MODE
REPEAT
-
PLAY
H+,
m
STOP
1
2
3
Press CD.
The power is turned on and the CD indicator lights up.
Press OPEN to open the disc compartment.
Place a disc with the printed side up and
close the disc compartment.
Total
number
of tracks
and total playing
time are
displayed.
Press'-
II PLAY/PAUSE/PRESET
to start
play.
The number of the track being played and elapsed
playing time are displayed.
* or F
PLAY on the remote control (except CSD-
ED37)
STOP/MEMORY
– Stops play.
'>lE
PLAY/PAUSE/PRESET
– Pauses play. To resume
play, press again.
' or II PAUSE on the remote control (except CSD-
ED37)
K+, FM
SKIP/SEARCH
– Searches for a particular point
during playback. Keep H
or
Pl pressed and then
release it.
– Skips to the beginning of a track. Press 14
or FM
repeatedly.
'REPEAT/FM
MODE/OSC – Repeats a single track or all
tracks. Select as follows.
C
1: A single track is played repeatedly.
Select a track
with 144 or
>1.
C
: All tracks are played repeatedly.
* or REPEAT on the remote control (except CSD-ED37)
To start play when the power is off, press CD. The
power is turned on and play of the loaded disc begins
(Direct Play Function).
If you load a disc while the CD indicator flashes in step 2,
play starts without pressing -11.
To select a track directly with the remote control (except
CSD-ED37),
press the numbered
buttons O-9 and +1 O. CD
play starts from the selected track and continues to the last
track.
Example:
To select number 25, press +10, +10 and 5.
To select number 10, press +10 and O.
After listening, press POWER (!) STANDBY to turn the
power off.
NOTE
Do not use irregular shape CDs (example: heart-shaped,
octagonal ones).
It may result in malfunctions.
Do not place more than one disc in the disc compartment.
Do not try to open the disc compartment
during play.
Do not touch the lens. Doing so may cause malfunctions.
Up to 30 tracks can be programmed
from the disc.
~
In stop mode, keep'=
STOP/MEMORY
pressed until "M" flashes in the display.
'
or
on the remote control (except CSD-ED37)
2
3
4
Press W,
>>1 to select a track, then press
H STOP/MEMORY
to store it.
Track number
Programmed
number
To select a track with the remote control (except
CSD-ED37)
Press the numbered buttons O-9 and +1 O.
Repeat step 2 to program other tracks.
Press -II
to start play.
To check the program, press ~<
or ~
in stop mode.
To clear the program, press
once in stop mode so that
"M" disappears
in the display.
To change the programmed
tracks, clear the program and
repeat all the steps again.
ENGLISH
5
Publicidad
