Publicidad
Idiomas disponibles
Idiomas disponibles
Insert a tape with the side to be recorded facing
out.
Get ready to record from the
source.
To record from a CD, press CD and load the disc.
To record from a radio broadcast,
press RADIO/
BAND and tune to a station.
NOTE (CSD-ED67
only)
Make sure that ~
of the OPE/BATT/DIR
indicator is on.
If it is not on, press DIR to turn it on.
Press
REC to start recording,
4*
PLAY
or 4
PLAY
is pressed
simultaneously.
When
the selected
function
is CD, CD play and
recording
starts
simultaneously,
For CSD-ED67,
REVERSE MODE is also pressed
simultaneously.
At the end of the tape, it reverses to the
back side although recording stops (the deck enters play
mode).
Press WA
STOP/EJECT
to stop the tape and press
STOP/MEMORY
to stop CD play.
To record only the selected tracks of a CD
1
Follow steps 1 to 3 of PROGRAMMED
PLAY on page 5
to program tracks.
2
Press
REC.
To stop recording,
press WA
STOP/EJECT.
When recording from a CD, play pauses.
To stop CD play,
press W STOP/MEMORY.
To pause recording,
press II PAUSE.
To resume
recording, press again.
To erase recording,
press
REC while the power is off.
After recording,
press POWER (!) STANDBY to turn the
power off.
To prevent accidental
erasure
Break off the plastic tabs on the cassette tape with a
screwdriver
or other pointed tool after recording.
To record on the tape again
Cover
the tab openings
with adhesive
tape,
etc.
Side A
m
"OO(!
~
\
4
Tab for side A
ENGLISH
7
Publicidad
