How to Install Your Canopy Housing
NOTE: This step is applicable after the necessary
wiring is completed.
1.
Assemble canopy by rotating key slot in canopy
over shoulder screw in hanger bracket, taking care
not to pinch the wires. Tighten shoulder screw. Fully
assemble and tighten second shoulder screw that
was previously removed. (Figure 1)
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and
the ceiling.
2.
Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket
utilizing the key slot twist-lock feature. (Figure 2)
1.
Secure the glass to housing assembly by twisting
in a clockwise direction. Twist the glass gradually
until it snaps onto the housing assembly
Do not over-tighten. (Figure 1)
How to Install Your Glass
.
Shoulder Screw
Housing
Assembly
Glass
14
Ceiling Canopy
Figure 1
Canopy Screw
Cover
Figure 2
Figure 1