How to Operate Your Ceiling Fan (Continued)
5.
Remote functions: (Figure 5)
•
Indicator LED light: fan speed
•
button: Turns fan off.
• Fan Speed:
Turns fan on and turns speed up.
Turns fan on and turns speed down.
•
Light button: Turns light on and off.
Increases light output level.
Decreases light output level.
• Sleep Timer: Fan must be turned on when set up
timer.
Tap and the fan and light will turn off after
1 hour.
Tap and the fan and light will turn off after
3 hours.
Tap and the fan and light will turn off after
6 hours.
6.
If airflow is desired in the opposite direction, turn
the fan off and wait for the blades to stop turning.
Remove the glass then slide the reverse switch on
the light plate assembly to the opposite position.
Assemble the glass to the housing assembly by
twisting in a clockwise direction and turn fan on again.
(Figure 6)
Reverse Switch Information
Season
Rotation Direction
Summer
Counterclockwise
Winter
Clockwise
How to Install Your Remote Control
1.
Installing Wall Holder: (Figure 1)
Attach wall holder using the two provided screws.
Switch Position
Left
Right
16
Figure 5
Reverse
Switch
Light Plate Assembly
Figure 6
Screws (2)
Wall Holder
Figure 1