Water2Buy W2B 110 Manual De Instrucciones página 23

•
•
•
•
•
•
Water Softener Settings:
Timer Softeners
Set the current time
Push in the red time set button (6)
Adjust the 24hour gear wheel (2)
Point the hour arrow (5) is to the current time.
The 24hour gear wheel (2) is the rear dial.
Let out the red time set button (6)
Twist the 24hour gear until it clicks, the click engages the
timer
Set the regeneration frequency
IMPORTANT: Your water softener has been pre­programmed to
regenerate at 2am each morning.
IMPORTANT: The pins must be pushed out at equal distances
apart. Push all the pins on the skipper wheel in before beginning the
configuration.
Push IN = OFF
Push OUT = ON