Descargar Imprimir esta página

Panasonic TX-48MZ800E Manual De Funcionamiento página 16

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 140
Select a row then move the focus to the desired item
in the row. Press OK button to make a selection or to
enter a sub-menu.
To display the Dashboard, press the Settings button
or press and hold the Home button on the remote or
highlight the Dashboard item on the Home screen and
press OK. On the Dashboard there will be options for
screensaver and the Settings, Inputs, Picture and
Notifications options available.
Live TV Mode Menu Content
Switch the TV to Live TV mode first and then press
the Menu button on the remote to see Live TV menu
options. To switch to Live TV mode you can either
press the Exit button or highlight the Live TV app on
the Home Screen and press OK.
Channels
Programme Guide: Open the electronic programme
guide. Refer to the Programme Guide section for
detailed information.
Channel Export/Import: Export this TV's satellite
channel list data to a connected USB storage device,
or import a previously exported data from a connected
USB storage device to this TV. The Channel Export
and Channel Import options will be available. Connect
a USB storage device (*) to the TV, highlight the option
you want to continue with and press OK. The Channel
Export/Import option will not be available if the input
source is not set to Satellite.
(*) The USB storage device must be formatted with the FAT32
file system.
Channel: Open the Channels menu. You can use the
options of this menu to search for broadcast channels.
Refer to the Channels section for more information.
Channel Management: You can edit the channels
and the channel list using the options of this menu.
Available options may change or the menu may
become inactive depending on the selected input
source, operator, and whether the channel installation
is completed.
Input Source - Antenna
Channel Skip: Set channels to be skipped when
switching the channels via the Programme +/- buttons
on the remote. Highlight the desired channel/s on the
list and press OK to select/unselect.
Channel Swap: Replace the positions of the two
selected channels in the channel list. Highlight the
desired channels on the list and press OK to select.
When the second channel is selected, the position of
this channel will be replaced with the position of the
first selected channel. You can press the Yellow but-
ton and enter the number of the channel you want to
select. Then highlight OK and press OK to go to that
channel. You may need to set the LCN option in the
Channels>Channel>Antenna menu to Off in order
to enable this feature.
Channel Move: Move a channel to the position of
another channel. Highlight the channel you want to
move and press OK to select. Then do the same for a
second channel. When the second channel is selected,
you can press the Blue button and the first selected
channel will be moved to the position of that channel.
When the confirmation dialogue appears, highlight
Continue and press OK to proceed. You can press
the Yellow button and enter the number of the channel
you want to select. Then highlight OK and press OK
to go to that channel. You may need to set the LCN
option in the Channels>Channel>Antenna menu to
Off in order to enable this feature.
Channel Edit: Edit channels in the channel list. Edit
the name and channel number (*) of the selected
channel and display Network Name, Channel Type
and Frequency information related to that channel
if available. Depending on the channel other options
may also be editable. Press OK or the Yellow button
to edit the highlighted channel. You can press the Blue
button to delete the highlighted channel.
(*) The selected channel number should not be used for
another channel in the channel list. You may need to set the
LCN option to Off in order to change the channel number.
Channel Delete: Highlight the desired channel/s on
the list and press OK or the Yellow button to select/
unselect. Then press the Blue button to delete the
selected channel/s. When the confirmation dialogue
appears, highlight Continue and press OK to proceed.
Clear Channel List: Delete all channels stored in the
channel list. A dialogue will be displayed for confirma-
tion. Highlight Continue and press OK to proceed.
Highlight Cancel and press OK to cancel.
Channel Skip: Set channels to be skipped when
switching the channels via the Programme +/- buttons
on the remote. Highlight the desired channel/s on the
list and press OK to select/unselect.
Channel Swap: Replace the positions of the two
selected channels in the channel list. Highlight the
desired channels on the list and press OK to select.
When the second channel is selected, the position
of this channel will be replaced with the position of
the first selected channel. You can press the Yellow
button and enter the number of the channel you want
to select. Then highlight OK and press OK to go to
that channel. You may need to set the LCN option in
the Channels>Channel>Cable menu to Off in order
to enable this feature.
Channel Move: Move a channel to the position of
another channel. Highlight the channel you want to
move and press OK to select. Then do the same for a
second channel. When the second channel is selected,
English - 15 -
Input Source - Cable

Publicidad

loading