Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Network wall socket
2.
LAN input on the rear side of the TV
Wireless Connection
A wireless LAN modem/router is required to connect
the TV to the Internet via wireless LAN.
Highlight the Wi-Fi option in the Network & Internet
menu and press OK to enable wireless connection.
Available networks will be listed. Select one and
press OK to connect. For more information refer to the
Network & Internet section under the title of Settings.
1.
Broadband ISP connection
A network with hidden SSID (network name) can not
be detected by other devices. If you want to connect
to a network with hidden SSID, highlight the Add new
network option under the Network & Internet menu
and press OK. Add the network by entering its name
manually using the related option.
Some networks may have an authorisation system that
requires a second login as such in a work environment.
In this case, after connecting to the wireless network
you want to connect to, highlight Notifications situated
on the Dashboard and press OK. Then highlight the
"Sign in to Wi-Fi network" notification and press OK.
Enter your credentials to log in.
A Wireless-N router (IEEE 802.11a/b/g/n/ac) with
simultaneous 2.4 and 5 GHz bands is designed to
increase bandwidth. These are optimised for smoother
and faster HD video streaming, file transfers and
wireless gaming.
Use a LAN connection for quicker data transfer
between other devices like computers.
The transmission speed differs depending on the
distance and number of obstructions between the
transmission products, the configuration of these
products, the radio wave conditions, the line traffic
and the products that you use. The transmission may
also be cut off or may get disconnected depending
on the radio wave conditions, DECT phones or any
other WLAN 11b appliances. The standard values of
the transmission speed are the theoretical maximum
values for the wireless standards. They are not the
actual speeds of data transmission.
The location where the transmission is most effective
differs depending on the usage environment.
The Wireless feature of the TV supports 802.11 a,b,g,n
& ac type modems. It is highly recommended that
you should use the IEEE 802.11n communication
protocol in order to avoid any possible problems while
watching videos.
You must change your modem's SSID when there are
any other modems around with the same SSID. You
can encounter connection problems otherwise. Use a
wired connection if you experience problems with a
1
wireless connection.
A stable connection speed is required to play back
streaming content. Use an Ethernet connection if the
wireless LAN speed is unstable.
On the Home Screen select Multi Media Player (MMP)
and press the OK button to launch. Select the media
type on the main media player screen. On the next
screen, you can press the Menu button to access a
list of menu options while the focus is on a folder or
a media file. Using the options of this menu you can
change the media type, sort the files, change the
thumbnail size and turn your TV into a digital photo
frame. You will also be able to copy, paste and delete
the media files using the related options of this menu, if
a FAT32 formatted USB storage device is connected to
the TV. Additionally you can switch the viewing style by
selecting either Normal Parser or Recursive Parser.
In Normal Parser mode the files will be displayed with
folders if any available. So only the selected type of
media files in the root folder or in the selected folder
will be displayed. If there isn't any media files of the
selected type, the folder will be assumed as empty. In
Recursive Parser mode the source will be searched
for all available media files of the selected type and
the found files will be listed. Press the Back/Return
button to close this menu.
In order to activate photo frame feature select Photo
as the media type. Then press the Menu button,
highlight Photo Frame and press OK. If you select the
One Photo mode option and press OK, the image that
you set as photo frame image earlier will be displayed
when photo frame feature is activated. If you select the
USB storage device option the first file (in Recursive
Parser mode) will be displayed. To set the photo frame
image press the Menu button while the photo file of
your choice is displayed, highlight Photo Frame Image
and press OK.
Additionally, you can toggle between browsing modes
by pressing the Blue button. List View and Grid View
modes are available. While browsing for the video,
photo and text files a preview of the highlighted file
English - 28 -
Multi Media Player
Publicidad
