Publicidad
Idiomas disponibles
Idiomas disponibles
14
www.electrolux.com
When you set the Power limitation
function to more than 6.0 kW, the power
of the hob is divided between its left and
right side.
5.13 Hob²Hood
It is an advanced automatic function
which connects the hob to a special
hood. Both the hob and the hood have
an infrared signal communicator. Speed
of the fan is defined automatically on
basis of mode setting and temperature of
the hottest cookware on the hob. You
can also operate the fan from the hob
manually.
For most of the hoods the
remote system is originally
deactivated. Activate it
before you use the function.
For more information refer to
hood user manual.
Operating the function automatically
To operate the function automatically set
the automatic mode to H1 – H6. The hob
is originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes temperature of the cookware
automatically and adjusts the speed of
the fan.
Automatic modes
Auto‐
matic
light
Mode
Off
H0
Mode
On
H1
Mode
On
3)
H2
Mode
On
H3
Mode
On
H4
Mode
On
H5
Mode
On
H6
1) The hob detects the boiling process and
activates fan speed in accordance with au‐
tomatic mode.
2) The hob detects the frying process and
activates fan speed in accordance with au‐
tomatic mode.
3) This mode activates the fan and the light
and does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch
for 3 seconds. The display
comes on and goes off
3. Touch
for 3 seconds.
4. Touch
a few times until
on.
5. Touch
of the Timer to select an
automatic mode.
To operate the hood directly
on the hood panel deactivate
the automatic mode of the
function.
Boil‐
2)
Frying
1)
ing
Off
Off
Off
Off
Fan
Fan
speed 1
speed 1
Off
Fan
speed 1
Fan
Fan
speed 1
speed 1
Fan
Fan
speed 1
speed 2
Fan
Fan
speed 2
speed 3
comes
Publicidad
