AXXAIR SAEX-00 Instrucciones Originales página 33

INNOVATIVE ORBITAL SOLUTIONS
Counter of cuts/bevels realized. You can modify it in the settings menu.
Join experience
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
System gives minimum and maximum
recommended speeds
Enter the speed in function of minimum
and maximum. Higher speed means
faster work and lower speed means
higher carbide tip durability
Press on the right arrow
After penetration of the motor in tube
press the Start button to realise the cycle
(360° rotation)
During rotation, you can modify the
advance speed by pressing + and -
buttons
Display of cutting/bevelling motor current
consumption
Press stop button to interrupt cycle. After
an interruption, if you press start, the
rotation will finish the cycle instead of
doing 360° except if you do a manual
movement
330B Route de Portes Les Valence - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - commerce@axxair.com - www.axxair.com
ENGLISH
-33-