DAZE Dazebox Home Manual De Instalación página 10

07 - Dazebox mounting
Note: The wall mounting procedure instruction is proivided below. For totem mounting, please refer to the separate manual.
EN
1
1. Use the drilling template (see the removable sheet in the center of the manual) to mark the correct positioning of the moun-
ting holes for Dazebox. Use a pencil to mark the four points where you will drill. It is recommended to have the bottom holes at
a height from the ground between 100 and 120mm for optimal use of Dazebox.
2. Drill the holes (8 mm diameter) in the wall using a drill.
3. Insert the provided plugs from the installation kit into the holes, using a hammer if necessary. ONLY insert the two upper
screws into the plugs, making sure to screw them in until there is about 3mm of distance between the wall and the screw head
(see reference image). The lower screws will be inserted later.
4
10.
2
3
2
3 mm
Home T
Home S
1
4
1
2
4
3
3