Publicidad
Idiomas disponibles
Idiomas disponibles
Laser Distance Meter/English
5. Functions
Area Measurement
Pressing the
button once will start the area measurement
Uint
function.
Pressing
button to take the first length measurement (e.g.
length).
Pressing
again to take the second length measurement
(e.g. width).
The result of the area measurement is displayed in the third
line, the individually measured values are displayed in lines 1
and 2.
Whilst the first connection between the Phone/PC and the
Laser distance meter is being established, a prompt for
the Pin-code of the instrument may be displayed. In this case,
enter the code 0000 into your Phone/PC.
Switching off BLUETOOTH
Press and hold Func/Unit button until the Bluetooth symbol
disappears in the display.
The BLUETOOTH switches off as soon as the instrument is
switched off.
Volume Measurement
By pushing
button twice it will start the volume measurement
Uint
function.
Pressing
to take first distance measurement (e.g. Length)
Pressing
to take second distance measurement(e.g. width)
The result of the area measurement from the values already
measured is displayed in the summary line.
6
Pressing
to takes the third distance measurement(e.g.
height). The value is displayed in the second line.
The result of the area measurement is displayed in the third
line, the two previously measured values in lines 1 and 2.
Historical Storage
The previous 20 records (measurements or calculated results)
are shown in the reverse order. Use
through these records.
You can clear all records by pressing Storage button and Clear
button simultaneously in historical storage mode.
Bluetooth function(Optional)
Switching on BLUETOOTH / sending measurements
Press and hold Func/Unit the Bluetooth symbol appears in
the display. Then you can use our Meterbox APP installed
on your phone to connect with this instrument.
Laser Distance Meter/English
MEM
buttons to navigate
7
Publicidad
