Hayward EASY-CH-DPHRXG Manual Del Usuario página 9

EN
4b. Electrical suppressor device
It is mandatory to install the coil suppressor, please see the instructions below:
4c. Trigger input by circulation pump
220 Vac 50 Hz
Circulation pump
Connect the Trigger cable as the example on the
site with the traditional circulation pump, to check
the fl ow is present in the pipe line.
Specifications
Range
Accuracy
Device precision
Flow rate pump (l/h)
Flow rate pump (SPA model only)
Power supply
Consumption (W)
Probe calibration
Pump state
Max. back-pressure
Relay contact (number 3)
Fuse
Weight
Dimensions (W–H–D)
EasyChem Double and Plug version | pH · ORP
Trigger input cable
5. SPECIFICATIONS
Only use spare parts supplied by Hayward brands ®
220 Vac 50 Hz
Circulation pump
Do not use the Trigger cable to the circulation pump
if the SVP (speed variable pump) is present, but use
the Flow check sensor, pay attention to disable or
enable the function in the setting menu.
EASY-CH-DPHRXG / EASY-CH-DPHRXGS
0-14pH; -99 -1000mV; 0...+55°C
±0.02pH, ±3mV; ±0.5°C
± 0.1 pH; ±10mV; ±1°C
1.5 l/h
1.5 l/h
220-240 VAC 50-60 Hz
28 Watt
Automatic
Pause – Supply
1.5bar
250 Vac 10A (resistive load)
500 mA (fast)
3.5 Kg
212 x 303 x 113 mm
Page 8 on 27
Flow check sensor