Publicidad
Idiomas disponibles
Idiomas disponibles
3. Press the timer button
display will show:
4. Press
and
to set the current time.
5. Press the timer button
display will show:
6. Press
and
to set the minutes.
7. Press the timer button again
Note: The clock and calendar will be reset to factory defaults if the appliance is turned off
or not on at light.
HEATING MOD E S
Press the mode button
from Comfort mode
tinuous cycle with each press.
Warning: When the appliance is heating, the heating condition indicator light will
illuminate
.
Comfort mode
• Press
and
to set the desired temperature between 5 and 35 °C.
ECO mode
• Press
and
to set the desired temperature between 1 to 31 ºC.
Note: The ECO mode is distinguished from the Comfort Mode by having 4 degrees less in its
configuration for energy savings.
Fr mode (Anti-freeze mode)
• The display shows
fixed, it cannot be adjusted.
P1/P2/P3 modes:
• Preset heating programs.
Below we show you some infographics for illustrative purposes of each program. These im-
ages are not displayed on the LED screen.
Note: If the clock setting has not been done before, the first time you enter the P1/P2/P3
program setting, it will ask you to set the day and clock in advance.
12
E NGL I SH
to confirm the day setting and enter the clock time setting. The
again to confirm hour setting and enter minute setting. The
to confirm and the time will be set
to choose the working mode you want. The modes would change
, ECO mode , P1 mode, P2 mode, P3 mode and to mode
. The desired temperature is maintained at 7 ºC. The temperature is
in a con-
Publicidad
