Dometic WAECO CoolFreeze BC55 Instrucciones De Uso página 24

Installing and connecting the cooling device
5.2 Operating and display elements
Control panel (fig. 2, page 3)
Item Designation
1 +
2 POWER ERROR Operating/fault display
3
4 –
5
6 ON/OFF
6 Installing and connecting the cooling
device
6.1 Installing the cooling device
A
NOTICE!
Before drilling holes, make sure the drill bit will not damage any-
thing on the other side (fig. 4, page 4).
➤ Select a suitable installation location. Observe the dimensions in fig. 5,
page 5.
➤ Remove the screws in the front panel (fig. 6, page 5).
➤ Take off the panel (fig. 6, page 5).
➤ Drill four holes (fig. 7, page 5).
➤ Fasten the cooling with four screws (fig. 7, page 5).
➤ Put the panel back on.
24
Explanation
Press once to increase the temperature
LED lights up green:
LED flashes green or
red
Display, shows the information
Press once to decrease the temperature
USB connection
Switches the cooling device on or off
CoolFreeze BC55
Cooling device in oper-
ation
Fault, see "Error table"
on page 30
EN