Teac W-780R Manual Del Usuario página 7

Synchro Reverse Dubbing Operation
TAPE | tape shorter than TAPE II
TAPE | tape longer than TAPE Il
TAPE |
Play ®
Side B
Re everse ("
bea
® Play
TAPE Il
Recording _@
Reverse (" eee
@ = Side A
7) Recording
No signal recording
® When TAPE | reaches the end of the forward
side, TAPE | stops and TAPE II enters the "no
signal recording' mode.
(@ When TAPE II reaches the end, both TAPE |
and II are reversed simultaneously then TAPE
| resumes reverse play and TAPE II resumes
recording.
@ When TAPE | reaches the end of the reverse
side, both TAPE | and II stop simultaneously.
TAPE!
Play ®
oo Reverse ("| sice8
Oe Sse
® Play
TAPE II
Recording @)
side 8
Reverse ("| Pe ide
@ Recording
@ When TAPE II reaches the end of forward
side, TAPE Il enters the record-pause mode
for the reverse side, while TAPE | continues
playback.
@ When TAPE | reaches the end, TAPE | and Il
start reverse play and recording simultane-
ously.
@ When TAPE II reaches the end of the reverse
side, both TAPE | and II stop simultaneously.
Notes:
@ The settings of the REC LEVEL control
and DOLBY NR switch are ignored
during dubbing as they have no effect.
e@ The <<, <, >» and >> buttons do
not function during NORMAL speed or
HIGH speed dubbing. Also, REC MUTE
and PAUSE do not function during HIGH
speed dubbing.
The sound quality of the dubbed tape
may be slightly worse than that of the
original tape. For this reason,
multigeneration dubbing is not
recommended.
If there is a TV set near the cassette
deck during high speed dubbing, it is
possible that the TV's horizontal
scanning frequency may be recorded on
the tape. If this occurs or to prevent it in
advance, dub at normal speed, switch
off the television or keep the deck a
reasonable distance away from the TV.
Manual editing with REC MUTE and
PAUSE
During normal-speed dubbing, you can edit
the dubbed tape as required using the REC
MUTE and PAUSE buttons. For example,
you can record only the required tunes
from TAPE | to TAPE II skipping unwanted
tunes.
© During normal-speed dubbing, when the
PAUSE button is pressed, TAPE I! enters
the record-pause mode while TAPE |
continues playback. While listening to
the sound from TAPE I, when it reaches
a section you want to dub, press the
PAUSE button again to restart recording
on TAPE Il.
During normal-speed dubbing, when the
REC MUTE button is pressed, TAPE II
enters the record muting operation as in
normal recording. To restart recording
on TAPE II, press the PAUSE button.
CD synchro dubbing operation
Start of CD synchro dubbing:
The shaded portions (==) in the following indicate the CD synchro dubbing mode.
Deck's CD SYNC button ON
Deck operation
Stop
CD player operation Stop
(A: Operation at the deck)
STOP button ON
CD SYNC button ON
Deck operation
CD player operation
Stop
Return to the beginning | _
of the tune, then
pause.
Deck operation
CD player
Rec/pause
Stop
STOP button ON =}
PLAY button ON