Publicidad
Idiomas disponibles
Idiomas disponibles
Never remove the pump cover during a wash cycle, always wait until the appliance has
finished the cycle, and is empty. When refitting the pump cover, ensure it is securely re-
tightened so as to stop leaks and young children being able to remove it.
Cleaning the water inlet filters
If the appliance doesn't fill, it takes a long time to fill with water, the starting button blinks
yellow or the display (if available) shows the relevant alarm (see chapter "What to do if..."
for more details), check if the water inlet filters are blocked .
To clean the water inlet filters:
1. Turn off the water tap.
2. Unscrew the hose from the tap.
3. Clean the filter in the hose with a stiff
brush.
4. Screw the hose back onto the tap. Make
sure the connection is tight.
5. Unscrew the hose from the machine. Keep
a towel nearby because some water may
flow.
6. Clean the filter in the valve with a stiff
brush or with the piece of cloth.
Care and cleaning
25
Publicidad
