Publicidad
Idiomas disponibles
Idiomas disponibles
7
START/PAUSE button ( START/PAUSA )
8
DELAY START button ( INICIO DIFERIDO )
9
Display
Symbols on the control panel :
= Handwash
= Child Lock
Display
9.1 - Temperature indicator and COLD
9.2 - Spin Speed indicator, RINSE HOLD
9.3 - Programme progress display: PREWASH
DRAIN
, OVERDOSAGE
• The programme progress display shows the washing phases of the selected programme.
• During a washing cycle, a black line blinks under the washing phase symbol of the running
programme. At the end of each washing phase, the line under the corresponding symbol
becomes fixed.
If the OVERDOSAGE symbol lights up at the end of the programme, it indicates that too
much detergent has been used.
9.4 - Options: PREWASH
9.5 - DOOR
• This symbol indicates if the door can be opened:
– the symbol is on: the door cannot be opened. The appliance is performing a washing
programme.
– the symbol is off: the door can be opened. The washing programme is finished.
9.6 - TIME SAVING
9.7 - The display shows the following information:
• Duration of the selected programme
– After selecting a programme, the duration is displayed in hours and minutes (for
example
recommended load for each type of fabric.
– After the programme has started, the time remaining is updated every minute.
• Delay start
– The selected delay (20 hours max) set by means of the relevant button appears on the
display for about 3 seconds (for example
selected programme is displayed.
9.1
9.2
, STAIN
- symbol (Door locked)
- option symbol
. The duration is calculated automatically on the basis of the maximum
9.3
9.9
9.4
9.5 9.6 9.7 9.8
symbol
, NIGHT CYCLE
, MAIN WASH
, SENSITIVE
, EXTRA RINSE
), then the duration of the previously
- symbols
, RINSE
, SPIN
7
,
Publicidad
