ProMinent DULCOLEVEL Manual De Instrucciones Originales página 15

Operation
Firmware Update
You can see the current fi rmware version in the sensor's
settings under "Information".
Procedure:
1. In the "Devices" view, tap on the sensor.
2. Tap on "Service".
3. Tap on "Firmware update".
4. If there is a newer fi rmware, follow the instructions in
the app.
Disconnect Sensor
You can disconnect the sensor at any time via the app.
Procedure:
1. In the "Devices" view, tap the sensor or the pump.
2. Press the "Connection settings" button.
3. Tap the "Disconnect" button.
4. Confi rm the disconnection process with "OK".
If you also want to delete the sensor from the devices list,
switch to the "Coupled" tab and tap the "Delete" button
on the sensor.
Cleaning & Maintenance
NOTICE
Unsuitable cleaning products can damage the sensor.

Do not use chemicals or strong detergents.

Clean the sensor with a dry cloth.
Maintenance
The sensor is designed so that no
maintenance is required.
During installation and operation,
ensure that the sensor base and tank
surface remain free of
contamination.
NOTICE
Damage due to opening of the housing
The sensor must not be opened. In case of malfunction
and damage, contact the ProMinent Service.
15 EN