To Make Video And Audio Connections - Magnavox 52MF437S Manual Del Usuario

________________________

10.2 To make video and audio connections

Use the inputs that are available on your device that provide the best
video or audio performance, as below.
BEST
BEST
PERFORMANCE
AV 3
Y
L
AUDIO
R
VIDEO
S VIDEO
Y
AV 1
S VIDEO
VIDEO
- If you experience a discolored line on the left or right side of the
set, adjust the picture position to the center of the screen with the
cursor buttons.
- Cables are often color-coded to connectors. Connect red to red,
white to white....
- Component video (YPbPr) connection is necessary to view video
sources, for example digital broadcastings coming from a settop
box, in 1080i, 1080p, 720p, 480i or 480p;
- The labels for the component video sockets may differ depending
on the DVD player or the device connected. Although the
abbreviations may vary, the letters B and R stand for the blue and
red component signals, respectively, and Y indicates the luminance
signal. Refer to the DVD player's or devices instructions for use for
definitions and connection details;
- This television is designed to accept high definition signal standards
480p, 720p, 1080p and 1080i as specified by the Electronic
Industries Association standard EIA770.3. Digital devices from
different manufacturers have the possibility of differing output
standards which may cause difficulties for the television to properly
display.
24
CONNECTOR CABLE
HDMI
(High-definition
Multimedia
Interface)
DVI to HDMI
(High-definition
Multimedia
Interface)
DVI to HDMI
(High-definition
Multimedia
Interface)
Component video
(480p,720p,480i,1080i)
- for digital audio
Pb Pr
(AV1, AV3)
- for analog audio
L AUDIO R
(AV1, AV3)
Pb Pr
S VIDEO
(AV1, Side)
VIDEO
RF/Coaxial
75
AUDIO CONNECTION
REQUIRED
No
DISPLAY
SYNC.
OUT
DIGITAL
IN
AUDIO
IN
DIGITAL
AUDIO
+
AV 1 HDMI 1
AV 2 HDMI 2
AV 3 HDMI 3
L
ANALOG
AUDIO
R
IN
ANALOG
AUDIO IN
+
HDMI 1
HDMI 2
HDMI 3
DISPLAY
SYNC.
OUT
DIGITAL
IN
AUDIO
DIGITAL IN
AUDIO
+
AV 1 HDMI 1
AV 2 HDMI 2
AV 3
AV 3
Y Pb Pr
L
AUDIO
R
VIDEO L AUDIO R
S VIDEO
Y Pb Pr
AV 1
L AUDIO R
AV1
R
AUDIO Side
L
L AUDIO R
AV1
R
Side
AUDIO
L
No
DVI to HDMI
- Your TV comes with all types of connectors with the exception of the
DVI connector but some of your equipment may be equipped with this
type. In this case you'll need a DVI to HDMI adapter or a HDMI to DVI
cable and separate audio cables, all available at your local dealer.
- Be sure to connect the DVI output connector first, then connect to the
HDMI input on your TV.