HTW -VP-60FS Manual De Usuario página 12

USER MANUAL
FUNCTIONS OF OPERATION PANEL
OSCILLATION CONTROL
To make the fan oscillate, press down on the oscillation knob located on top of the motor housing. To stop
the fan oscillating, pull up on the oscillation knob when the fan is in the desired position.
1. POWER/SPEED button
2. Off button
3. TURN BUTTON
4. Mode button
5. Timer button
FUNCTIONING
1. Place the fan on a dry, level surface.
2. Plug the power cord into a standard 220-240V AC wall outlet.
3. Press the "SPEED/ON" key to set the desired speed "HIG "MED" "LOW".
4. Press the "OFF" key to turn off the fan.
5. Press "SWING" to start or stop the fan head swing.
6. Press the "MODE" key to switch from normal airflow to "SLEEP" MODE.
In "SLEEP MODE", ALL lights will turn off within 30 seconds, if there is no other operation here.
NOTES ON CLEANING THE FAN:
1. Always unplug the fan before cleaning, simply lift the clips on the guard ring and remove the front guard.
2. Use a soft cloth moistened with mild soap to clean the fan and guard. Do not use abrasive cleaners.
3. DO NOT immerse the fan in water and never allow water to enter the motor component.
4. DO NOT use gasoline, thinner or other chemicals to clean the fan.
12

PEDESTAL FAN
6. Turn indicator
7. Timer indicator (0.5H, 1H, 2H, 4H)
8. Fan speed indicator (high, medium, low)
9. Mode indicator
HTW-VP-60FS