KRHÜNER 52929 Manual De Instrucciones página 8

Check the stability of the heater by standing it on
a smooth level surface.
Parts
1. Thermostat Knob
2. Handle
3. Oil Filled Fins
4. Foot
OPERATION OF THE HEATER
1) Choose a suitable locati on for the heater, taking
into account the safety instructi ons above.
2) Insert the plug of the heater into a suitable socket.
3) Turn the thermostat knob fully in a clockwise
directi on to the maximum se� ng.
4) Turn on the heati ng element by means of the rocker switch on the side panel. When
the heati ng element is on the power switch will illuminate.
5) When the desired room temperature has been reached, the thermostat knob should be
turned slowly anti -clockwise unti l the thermostat is heard to click off and the light on
the power switch is seen to go out. A� er this the heater will keep the air temperature
in the room at the set temperature by switching on and off automati cally.
3. CLEANING AND MAINTENANCE 3. CLEANING AND MAINTENANCE
CLEANING
1) Always un-plug the heater from the wall socket and allow it to cool down before cleaning.
2) Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth.
Do not use any detergents or abrasives and do not allow any water to enter the heater.
WARNINGS:
• Do not immerse the heater in water.
• Do not use any cleaning chemicals such as detergents and abrasives.
• Do not allow the interior to get wet as this could create a hazard.
MAINTENANCE
1. Always remove the plug from the socket-outlet and allow the radiator to cool down
before clean the heater.
2. Wipe radiator with a so� damp (not wet) cloth.