Publicidad
Product Description / Object of Declaration:
This Product is designed for use with:
Suitable for use in hazardous area:
Protection Level:
Approved body details and role:
This Declaration of conformity/incorporation is
issued under the sole responsibility of the
manufacturer:
UKCA Declaration of Conformity
This Declaration of conformity/incorporation is issued under the sole responsibility of the
manufacturer:
Supply of Machinery (Safety) Regulations 2008
Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres Regulations 2016
Electromagnetic Compatibility Regulations 2016
by complying with the following statutory documents and harmonised standards:
BS EN ISO 12100:2010 Safety of Machinery - General Principles for Design
BS EN 12621:+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety
requirements
BS EN 1127-1:2019 Explosive atmospheres - Explosion prevention - Basic concepts
BS EN ISO 80079-36:2016 Explosive Atmospheres- Part 36: Non Electrical equipment for explosive atmospheres-
Basic methods and requirements.
BS EN ISO 80079-37:2016 Explosive Atmospheres- Part 37: Non Electrical equipment for explosive atmospheres -
protection by methods "c", "b" and "k".
BS EN 60079-0:2018 Explosive atmospheres - Equipment. General requirements
BS EN 60079-1:2014 Explosive atmospheres - Equipment protection by flameproof enclosures "d"
BS EN 60079-7:2015 Explosive atmospheres. Equipment protection by increased safety "e"
BS EN 60034-1: 2010 Rotating electrical machines
Providing all conditions of safe use/installation stated within the product manuals have been complied with and
also installed in accordance with any applicable local codes of practice.
Signed for and on behalf of
Carlisle Fluid Technologies UK
Ltd:
77-3337 R2.1
Electric Pumps E2-7, E2-15 XXX, E2-20, E2-30, E2-
40, E2-60, EV2-15, EV2-30, E4-60, E4-100
Solvent and Water based materials
Zone 1
Ex h IIB T4 Gb X (Pump)
II 2 G Exd/Exde IIB T4 IP55 (Motor) CE0722
II 2 GD ck T4 (Gearbox)
Element Materials Technology (0891)
Lodging of Technical file
Carlisle Fluid Technologies UK Ltd,
Ringwood Road,
Bournemouth, BH11 9LH. UK
F. A. Sutter
5/5/21
3
Executive President: Engineering and
Operations, Scottsdale, AZ, 85254. USA
www.carlisleft.com
ES
Publicidad
