Kenmore AllergenSeal 125.81414610 Manual De Uso Y Cuidado página 19

HEPA MEDIA EXHAUST FILTER CHANGING
WARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged exhaust
filter or without the exhaust filter
installed. Do not operate without filter
cover installed.
EXHAUST FILTER - HEPA MEDIA
The HEPA media exhaust filter cartridge must
be replaced when dirty. Replace the filter
when the entire surface area is covered
evenly. The filter CANNOT be washed as
it will lose its dust trapping ability.
NOTE: See REPLACEMENT PARTS for part
number and purchase details (page 6).
1. Push latch up to release the exhaust filter
cover from slot in canister.
2. Pull filter cover down and outward to
remove it from filter chamber in the canister.
3. Remove the HEPA media exhaust filter
cartridge from the filter cover.
HEPA Media
Exhaust Filter
4. Insert the new HEPA media exhaust filter
cartridge into the filter cover with the
rubber seal upward.
5. To replace the exhaust filter cover,
insert the two tabs on the cover into
the slots at the top of the filter chamber.
6. Rotate filter cover down until it snaps into
place.
- 19 -