Model: 6303
ASSeMBlY INSTRUCTIoNS
Find a large, clean area to assemble your appliance�
Remove all packing material before assembling�
Sharp edges. Wear gloves while assembling.
Heavy pieces. Two people should assemble this appliance.
Use four (4) M6 shoulder bolts
STEP 01
NOTICE
and hood handle standoff and two (2) mica washers to the front of
the hood�
• DO NOT mix old and new batteries.
• DO NOT mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, etc.) batteries.
Install the four (4) control knobs by pushing them into place
STEP 03
in the oFF position�
BLACKSTONEPRODUCTS.COM/SUPPORT
CAUTIoN
CAUTIoN
TOOLS NEEDED:
#3 Phillips head screwdriver &
Adjustable wrench
[a.]
to attach the handle
NOT INCLUDED:
lPG cylinder
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
lPG cylinder must include collar to
lPG cylinder must include collar to
protect lPG cylinder valve.
protect lPG cylinder valve.
NOT INCLUDED:
17" griddle base
ASSEMBLY GUIDE
NOTICE
Place appliance on a heat-resistant and flame-resistant
TOOL NEEDED:
#3 Phillips head screwdriver
surface while in use.
Slide the grease cup into the holder on the back of the
STEP 02
griddle body�
Hot appliance. The cover/lid/hood (as applicable) MUST be
open/removed when the appliance is in use.
NOT INCLUDED:
lPG cylinder
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
NOTICE
DO NOT place items on stabilizing shelf during use.
NOT INCLUDED:
22" griddle base
| OWNER'S MANUAL
TOOL NEEDED:
Adjustable wrench
CAUTIoN
ELECTRIC REQUIREMENTS:
120V 60Hz
NOT INCLUDED:
AA battery
NOT INCLUDED (OPTIONAL):
Two (2) d batteries
TOO
5mm
NOT
one
opti
(for
05