The terms "device" or "product" are used in the warnings and instructions to refer to:
Garage Cabinet
2.1.
Safety in the workplace
a)
Make sure the workplace is clean and well lit. A messy or poorly lit workplace may lead to accidents.
Try to think ahead, observe what is going on and use common sense when working with the device.
b)
If you are unsure about whether the product is operating correctly or if you find damage, please
contact the manufacturer's service centre.
c)
Only the manufacturer's service centre may make repairs to the product. Do not attempt to make
repairs yourself!
d)
Regularly inspect the condition of the safety labels. If the labels are illegible, they must be replaced.
e)
Please keep this manual available for future reference. If this device is passed on to a third party, the
manual must be passed on with it.
f)
Keep packaging elements and small assembly parts in a place not available to children.
g)
If this device is used together with another equipment, the remaining instructions for use shall also be
followed.
Remember! When using the device, protect children and other bystanders.
2.2.
Personal safety
a)
The device is not designed to be handled by persons (including children) with limited mental and
sensory functions or persons lacking relevant experience and/or knowledge unless they are supervised
by a person responsible for their safety or they have received instruction on how to operate the
device.
b)
When working with the device, use common sense and stay alert. Temporary loss of concentration
while using the device may lead to serious injuries.
c)
The device is not a toy. Children must be supervised to ensure that they do not play with the device.
2.3.
Safe device use
a)
Do not overload the device. Use the appropriate tools for the given task. A correctly-selected device
will perform the task for which it was designed better and in a safer manner.
b)
Keep the device in perfect technical condition. Before each use check for general damage, especially
check moving components for cracked parts or elements, and for any other conditions which may
impact the safe operation of the device. If damage is discovered, hand over the device for repair
before use.
c)
To ensure the operational integrity of the device, do not remove factory-fitted guards and do not
loosen any screws.
d)
When transporting and handling the device between the warehouse and the destination, observe the
occupational health and safety principles for manual transport operations which apply in the country
where the device will be used.
e)
Clean the device regularly to prevent stubborn grime from accumulating.
f)
It is forbidden to interfere with the structure of the device in order to change its parameters or
construction.
g)
Do not overload the device.
ATTENTION! Despite the safe design of the device and its protective features, and despite the use
of additional elements protecting the operator, there is still a slight risk of accident or injury when
using the device. Stay alert and use common sense when using the device.
3. Use guidelines
The product is designed to store equipment, workshop tools and organise the workplace.
The product is intended for home use only.
The user is liable for any damage resulting from unintended use of the device.
EN