Create WIND STYLANCE DC Manual Del Usuario página 10

RE MO TE CON TROL CO NNECT IO N
• Make the connection between the receiver cables and the fan motor cables following the color
indications. Make sure the connection is tight.
DC
RE MO TE CON TROL RECE IVE R CO LLOCAT IO N
CA NOPY AS SE MB LY
• Raise the canopy to hanging bracket, aligning loosened screws in hanging bracket with slotted
holes in the canopy.
• Twist the canopy to lock. Re-insert the screws and secure all the screws with a screwdriver.
• With hanging bracket secured to the outlet box and able to support the fan, you are now ready
to hang your fan.
• Grab the fan firmly with two hands. Slide downrod through the opening in the hanging bracket
and let the hanging ball rest on the hanging bracket.
• Turn the hanging ball slot until it lines up with the hanging bracket tab.
Tip: Seek the help of another person to hold the stepladder in place and to lift the fan up to you
once you are set on the ladder.
E NGL I SH
10
Ground
wire
L
L
(black)
Input N
N
(white)
1
Green/yellow stripe
Neutral N (white)
Light L (blue)
Remote
control
Grey DC motor L
receiver
Pink DC motor L
Red DC motor L
2 3