Create WIND STYLANCE DC Manual Del Usuario página 12

DECO R ATIV E C OVE R AS SE M B LY
Once the connections plate has been assembled and secured, screw the decorative cover back
to the connections plate using the central screw.
C H ECK THE I NSTALL AT IO N
• Check the correct operation of the ceiling fan, checking that no strange movement or misalign-
ment is observed in any part of the fan.
• In the event that some kind of hum / vibration can be seen, you can proceed to adjust the blades
with the shooting kit.
• This kit has self-adhesive weights and "u" shaped clips.
• Turn off the ceiling fan.
• You can put the clip in the center of any blade and check if the vibration decreases.
• Turn on the fan and check. If no change is seen, turn off the fan and add another clip to a differ-
ent blade or use the adhesive weights.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.
E NGL I SH
12
CEILING FAN WITHOUT LED LIGHT