Publicidad
Idiomas disponibles
Idiomas disponibles
Installing the Sound
Bar Bracket
To Sony Dealers
WARNING
The following instructions are for Sony
dealers only. Be sure to read safety
precautions described above and pay
special attention to safety during the
installation, maintenance and checking
of this product.
Be sure to install the
Sound Bar Bracket
securely to the Wall-
Mount Bracket following
the instructions in this
instruction manual.
If any of the screws are loose or fall out, the
Sound Bar Bracket may fall and cause injury
or property damage.
Be sure to avoid any
damage to the corner of
TV or LCD Display when
you install Sound Bar
Bracket. Be sure to
exercise caution to
prevent hitting your head
or body on the corner of
the TV or LCD Display
during assembly.
Be sure to use the
supplied screws and
attachment parts
properly following the
instructions given in
this instruction
manual. If you use
substitute items, the
Sound Bar may fall and
cause bodily injury to
someone or damage to
the Sound Bar.
Be sure to assemble the
Sound Bar Bracket
properly following the
instructed procedure
explained in this
instruction manual.
If any of the screws are loose or fall out, the
Sound Bar may fall and cause bodily injury to
someone or damage to the Sound Bar.
Be sure to keep a
distance between TV or
LCD Display and Sound
Bar as shown below:
Be sure to tighten the
screws securely in the
designated position.
If you fail to do so, the Sound Bar may fall
and cause bodily injury to someone or
damage to the Sound Bar.
Be careful not to subject
the Sound Bar to shock
during installation.
If the Sound Bar is exposed to shock, it may
fall or break apart. This may cause injury.
After proper installation
of the Sound Bar, secure
the cables properly.
If people or objects get tangled with cables,
this may result in injury or damage to the
Sound Bar.
− 3 (EN) −
Do not allow the AC
power cord or the
connecting cable to be
pinched.
If the AC power cord or the connecting cable
is pinched between the unit and the wall or
is bent or twisted by force, the internal
conductors may become exposed and cause
a short circuit or an electrical break. This may
cause a fire or an electric shock.
> 70 mm
EN
Publicidad
