Descargar Imprimir esta página

MELICONI AT 380 USB Instrucciones De Uso página 6

Antena amplificada para interiores

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
C
If the picture quality is unsatisfactory, or if there is no signal, proceed as follows:
• Rotate and/or tilt the antenna until you get the best signal possible (figure 3).
• Adjust the position, extension and direction of the stylus antennas on the sides.
• Adjust the gain by regulating amplification; maximum gain does not always correspond
to better picture quality.
• If possible, tuning the channels of the TV or decoder is recommended, by connecting
it to another valid signal source (antenna of the apartment block).
Remember that the use of an indoor antenna is to be considered an "alternative" solution
for receiving TV channels, so results will depend on the conditions of use and on the
strength of the signals able to reach the antenna inside the building.
For any eventuality, send an email to the address: antenne@meliconi.com
• Amplified indoor antenna
• Power supply: 5V DC/50 mA
• Reception of digital terrestrial TV signals (DVB-T) and digital radio signals DAB and DAB+.
• Reception range: VHF (174~230MHz) band III and UHF (470~694 MHz).
• Filters for interference from 5G + 4G LTE + GSM.
• Adjustable gain
• Output impedance: 75 Ohm
The guarantee shall be declared null and void if the product is tampered with or used
improperly. Keep the purchase receipt for the guarantee.
• Antenna
• USB power cable
• Instruction booklet
"AT380 USB amplified antenna" radio device is compliant with Directive no. 2014/53/EU (RED).
The full text of the EU Declaration of Conformity is available at: www.meliconi.com/doc/at380usb
The crossed-out wheelie bin symbol on the device indicates that the product must be collected separately from other waste
at the end of its useful life. The user must therefore take the product, at the end of its useful life, to an appropriate separate
waste collection centre for electrical and electronic waste, or hand it in to the retailer when purchasing an equivalent new
device. Proper separate waste collection means that the device can then be suitably recycled, treated or disposed of in an
eco-compatible manner, thus helping to avoid possible negative effects on the environment and on health and aiding the
recycling of the materials the device is made of.
4
Improving reception
SPECIFICATIONS AND TECHNICAL DATA:
TWO-YEAR WARRANTY
PACK CONTENTS:
Simplified EU Declaration of Conformity
The manufacturer, Meliconi SpA, declares that the

Publicidad

loading