MSW Motor Technics MSW-FBBD-150100D Manual De Instrucciones página 25

3.1. Device description
Sanding operations are inherently dusty. It is strongly recommended that users use a dust-collection system
when using this belt and disc sander. The use of a mask or respirator is still recommended even when a dust
collection system is in use.
3.2. Preparing for use
APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative humidity should be less
than 85%. Ensure good ventilation in the room in which the device is being used. There should be at least
10 cm distance between each side of the device and the wall or other objects. The device should always be
used when positioned on an even, stable, clean, fireproof and dry surface, and be out of the reach of
children and persons with limited mental and sensory functions. Position the device such that you always
have access to the power plug. The power cord connected to the appliance must be properly grounded
and correspond to the technical details on the product label.
EN
1 – Belt Tension Lever
2 – Sanding Belt
3 – Belt Tracking Control Knob
4 – Mitre Gauge
5 – Tilting Worktable
6 – Sanding Disc
7 – ON/OFF Buttons