MSW Motor Technics MSW-FBBD-150100D Manual De Instrucciones página 32

ON/OFF BUTTONS
The On/Off buttons are located on the front of the sander.
1. Press the GREEN button (I) to turn the sander on.
2. Press the RED button (0) to turn the sander off.
• If the power supply is interrupted for any reason, the unit will automatically switch off. When
power is restored, simply press the GREEN button to resume work.
BELT SANDING
HORIZONTAL AND VERTICAL SANDING
The sanding belt can be used in the vertical or horizontal position, depending on operator needs and the
workpiece.
To change from one position to the other:
1. Loosen the socket head screw using the 6 mm hex wrench provided.
2. Manually move the sanding belt to the desired angle and retighten the socket head screw.
EN