Descargar Imprimir esta página

Craftsman 917.27686 Manual Del Operador página 24

Publicidad

Idiomas disponibles

Idiomas disponibles

CLEANING
o Clean engine,
battery, seat, finish,
etc,
of all foreign
matter.
• Keep finished
surfaces
and wheels free
of all gasoline,
oil, etc.
• Protect
painted
surfaces
with auto-
motive type wax.
We do not recommend
using a garden
hose or pressure
washer
to clean your
tractor
unless the engine
and transmis-
sion are covered to keep water ouL Water
in engine or transmission
will shorten
the
useful life of your tractor.
Use compressed
air or a leaf blower to remove grass,
leaves and trash from tractor and mower.
WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER-
VICE OR ADJUSTMENTS:
1. Depress brake pedal fully and set parking brake.
2. Place attachment clutch in "DISENGAGED" position.
3.
4.
5.
Turn ignition
key to "STOP" and remove key.
Make sure the blades and all moving parts have completely
stopped_
Disconnect
spark plug wire from spark plug and place wire where it cannot
come in contact with plug.
TRACTOR
TO REMOVE
MOWER
1. Place attachment clutch in "DISEN-
GAGED" position.
2. Lower attachment lift lever to its lowest
position.
3. Disengage belt tension rod (K) from
lock bracket (L).
CAUTION: Belt tension rod is spring
loaded. Have a tight grip on rod and
release slowly.
4. Remove mower belt from electric
clutch pulley (M),
5o Disconnect front link (E) from mower
- remove retainer spring and washer,
6.
Go to either side of mower and discon-
nect mower suspension
arm (A) from
chassis
and rear lift link (C) from rear
mower bracket
(D) - remove retainer
springs
and washers°
7o Go to other side of mower and discon-
nect the suspension
arm and rear lift
_
link,
CAUTION:
After rear lift links are dis-
connected,
the attachment
lift lever will be
spring loaded.
Have a tight grip on lift lever
when changing
position
of the lever.
8.
From right side of mower, disconnect
anti-sway
bar (S) from right rear mower
bracket
(D) _ remove
retainer
spring
and washer
and pul! mower toward
you until the bar fails from the hole in
bracket.
02937
24

Publicidad

loading