Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
•
If the parts have damage, do not use the machine.
•
If you do not have all the parts, do not operate the
machine.
•
If the parts are damaged or missing, speak to the
service center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with
local regulations.
10.2 ASSEMBLE AS A BLOWER
1. Align the grooves (5) with the tabs (4) in the blower
tube.
2. Install the tube onto the blower housing until the
tabs engage the grooves.
3. Turn the tube in the direction of the arrow until the
two tabs lock into the positions.
10.3 ASSEMBLE AS A VACUUM
WARNING
Make sure that the machine is in the OFF position,
and the impellers stop before you attach or remove
tubes.
1. Connect the collection bag to the machine in the
same procedures as blower tube.
English
4
5
2. Connect the blower tube to the air vent in the same
procedures as above.
10.4 INSTALL THE BATTERY PACK
WARNING
•
If the battery pack or charger is damaged, replace
the battery pack or the charger.
•
Stop the machine and wait until the motor stops
before you install or remove the battery pack.
•
Read, know, and do the instructions in the battery
and charger manual.
1. Align the lift ribs on the battery pack with the
grooves in the battery compartment.
2. Push the battery pack into the battery compartment
until the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
7
EN
Publicidad
