Descargar Imprimir esta página

GreenWorks Tools 24SB90 Manual Del Operador página 8

Soplador para taller

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
10.5 REMOVE THE BATTERY PACK
1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
11
OPERATION
Make sure the blower tube is in position before
operation.
11.1 START THE MACHINE
1. Pull the trigger (1) to start the machine.
2. Push the trigger to increase the speed.
3. Release the trigger to decrease the speed.
11.2 STOP THE MACHINE
1. Release the trigger to stop the machine.
Wait until the motor stops after you stop the machine.
11.3 OPERATION TIPS
Make sure that the machine is in good condition.
Make sure that the tubes and guards are in position.
Do not point the machine at the person or loose
materials before you start the unit.
Ear protection is necessary to decrease the risk of
hearing loss related to noise level.
Obey all applicable laws, regulations, standards and
ordinances.
11.4 OPERATE AS A BLOWER
1. Hold the machine tightly.
2. Operate from side to side.
3. Move the machine forward slowly.
4. Keep the collected unwanted materials in front of
you.
Use rakes and brooms to loosen the unwanted
material before you blow.
WARNING
1
NOTE
NOTE
English
Use the low speed to move dry items, and high speed
to move heavy items such as large unwanted
materials or gravel.
11.5 OPERATE AS A VACUUM
1. Hold the machine tightly.
2. Tilt the mulcher tubes (2 - 4 in. or 5 - 10 cm).
3. Use a sweeping action to collect light unwanted
materials.
Make sure that you install and zip the bag.
12
MAINTENANCE
Do not let brake fluids, gasoline, petroleum-based
materials touch the plastic parts. Chemicals can cause
damage to the plastic, and make the plastic
unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
Remove the battery pack from the machine before
maintenance.
8
NOTE
NOTE
CAUTION
CAUTION
WARNING

Publicidad

loading

Este manual también es adecuado para:

Blm302