Descargar Imprimir esta página

GreenWorks Tools 24SB90 Manual Del Operador página 9

Soplador para taller

Publicidad

Idiomas disponibles

Idiomas disponibles

12.1 CLEAN THE MACHINE
CAUTION
The machine must be dry. Humidity can cause risks of
electrical shocks.
Clear the unwanted material out of the air vent with
a vacuum cleaner.
Do not spray the air vent or put the air vent in
solvents.
Clean the housing and the plastic components with
a moist and soft cloth.
12.2 CLEAN THE COLLECTION BAG
Wear safety glasses and a dust mask.
If it is necessary, clean the bag 1 time a year or
more.
1. Remove the bag.
2. Turn the bag inside out.
3. Hang the bag up and clean it.
4. Hang the bag to dry.
5. Turn the bag right-side out and install it again.
12.3 CLEAN A BLOCKED TUBE /
IMPELLER
1. Push the on/off button.
2. Wait until the machine fully stops.
3. Remove the battery pack.
4. Remove the blower tube or mulcher tubes and the
bag.
5. Remove the material that causes a blockage of the
tube or impeller.
6. Make sure that the impeller has no damage.
7. Turn the impeller with the hand to make sure that
there is no blockage.
8. Install the blower tube or mulcher tubes and the
bag.
WARNING
Avoid the intake of large objects that could damage
the impeller.
13
TRANSPORTATION AND
STORAGE
WARNING
Remove the battery pack from the machine before
tranportation and storage.
English
13.1 MOVE THE MACHINE
Only hold the machine with the handgrip.
13.2 STORE THE MACHINE
Clean the machine before storage.
Make sure that the motor is not hot when you store
the machine.
Make sure that the machine does not have loose or
damaged parts. If it is necessary, do these steps/
instructions:
Replace the damaged parts.
Tighten the bolts.
Speak to a person of an approved service
center.
Store the machine in a dry area.
Make sure that children cannot come near the
machine.
14
TROUBLESHOOTING
PROBLEM
POSSIBLE
CAUSE
The tube has
blockages.
The impeller has
blockages.
The bag is full.
The bag is dirty.
The ma-
The bag has
chine does
damage.
not blow or
mulch.
The bag is unzip-
ped.
The battery pack
is not secure.
The battery ca-
pacity is low.
9
EN
SOLUTION
Make sure that the
tube is clear.
Make sure that the
impller is clear.
Empty the bag.
Clean the bag.
Replace the bag.
Lock the bag.
Make sure that you
latch the battery
pack correctly.
Charge the battery
pack.

Publicidad

loading

Este manual también es adecuado para:

Blm302