Jofel JET SMART Manual De Instrucciones página 24

1- Remove the rear cover. Break the cut-out opening prepared for passing the
mains cable through and screw it to the and screw it to the connection plug.
Screw in the cable clamp provided as strain relief protection.
HAND DRYER JET SMART
Connection strip for
power cord to network
220-240V
50/60Hz
POWER CORD
certified under IEC
60227 or IEC
60245.
With nominal area
between 1-2,5
mm²
Pag.7
Internal cord
anchorage
must be used
(anti-pull
protection)
EN