Jofel JET SMART Manual De Instrucciones página 30

EN
HAND DRYER JET SMART
• Heating element. If the device does not expel hot air when the LED diffuser light
is red, then there is a breakdown on the heating element. Wait for some minutes
until device cools off. If the problem persists, please contact Technical Support.
• Cleaning. Keep drain clean. Clean only with damp cloth. Do not use acid or
bleach. Clean display of IR sensors regularly.
Note: The button situated on the cover of the electronic is used to reset the
motor operating hours counter, and therefore, it shows when the brushes have
been changed.
To reset counter, press the button and at the same time, turn on the device by
means of the illuminated pushbutton. Please keep it pressed until the first bar
illuminates. Once the pushbutton is released, the counter is reset to zero and all
the bars light up continuously.
Button to reset
motor counter
Pag.13