Husqvarna ST 324 Manual De Usuario página 22

Problem
Loss of traction drive/
slowing of drive speed
Loss of snow discharge
or slowing of snow dis-
charge
Failure of auger rotation
after the grip is released
The lights are not on (if
so equipped)
The chute rotator is diffi-
cult to move
The product turns to one
side
Transportation and storage
• For storage and transportation of the product
and fuel, make sure that there are no leaks or
fumes. Sparks or open flames, for example from
electrical devices or boilers, can start a fire.
22
Possible cause
The belt slips.
The belt is worn.
The belt is off the pulley.
The chute deflector is clogged.
Foreign objects clog the augers.
The shear pin is broken.
Excessive snow and ice build up in between
track components.
The friction drive wheel is worn.
The friction disc is wet
The drive belt is not aligned.
The discharge deflector is not aligned.
The engine is not running.
The cable connection is loose.
The LED is burnt out.
There is debris in the chute rotator mecha-
nism.
The cables are kinked or damaged.
The tire pressure is not equal.
The product drives with only one wheel.
Uneven sled adjustment.
Uneven skid plates adjustment.
Transportation, storage and disposal
Adjust the cable. Adjust the belt.
Check / replace the belt. Adjust the
pulley.
Check / reinstall the belt. Adjust
the pulley.
Clean the chute deflector.
Remove the debris or the foreign
object from the augers.
Replace the broken shear pin.
Remove snow and ice build up
from in between track compo-
nents.
Contact an authorized service cen-
ter.
Let the friction disc dry
Adjust the drive belt.
Adjust the discharge deflector.
Start the engine.
Check the cable connections at
the engine and the lights.
Replace the LED light module. In-
dividual LEDs can not be replaced.
Clean the internal parts of the
chute rotator mechanism.
Make sure that the cables are not
kinked. Replace the cables that
are damaged.
Adjust the tire pressure and fill the
tire.
Inspect the tire lock pin.
Adjust the skid plates and the
sledge.
Adjust the skid plates and the
sledge.
• Always use approved containers for storage and
transportation of fuel.
• Empty the fuel tank before you put the product in
storage for a long period of time. Discard the fuel
at an applicable disposal location
• Safely attach the product during transportation to
prevent damage and accidents.
Solution
2081 - 003 -