Descargar Imprimir esta página

Kobra S6-HYBRID Instrucciones De Manejo página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
IMPORTANT WARNINGS
BEFORE TURNING ON THE MACHINE CAREFULLY READ
THE INSTRUCTIONS FOR USE AND THE FOLLOWING
WARNINGS.
Before plugging in the appliance make sure that the
voltage and mains frequency match to those on the plate
on the front of the machine.
UNPLUG THE POWER CABLE FROM THE MAINS IN
THE FOLLOWING CASES:
- BEFORE LIFTING THE MACHINE FROM ITS STAND
AND BEFORE EMPTYING THE BIN
- BEFORE CARRYING OUT ANY MAINTENANCE OR
REPAIRS OR WORKING ON THE INNER PARTS OF
THE MACHINE.
- UNPLUG THIS EQUIPMENT WHEN NOT IN USE FOR
AN EXTENDED PERIOD OF TIME.
NOMINAL VOLTAGE: CONTINUOUS OPERATION
NOMINAL VOLTAGE +10%: MAX. OPERATION 50 MIN.
Congratulations on the purchase of your KOBRA HYBRID
shredder, one of the latest generation of KOBRA products.
KOBRA HYBRID comes with a special innovative energy
management system storing energy during normal
document shredding and then releasing it (when LEDs
are off) so that some documents can be shredded
disconnecting the machine from the mains for maximum
energy savings and zero consumption in stand-by.
INSTALLATION
For appliances provided with mains plug use a socket
outlet which is easily accessible near the machine and
provided with a protective earthing connection.
Remove the machine from its packaging and place the
head (1) on the stand (2) as shown in figure 1. Fully insert
the paper collection container (3) into the stand. The
machine is ready for operation.
There is a transparent window on the front which allows
you to check the level of shredded paper inside so the
operator can empty the bin when it is full.
To empty the paper collection bin, remove it from the
stand, empty the bin and then place it back in the stand.
USING THE APPLIANCE
After plugging in the machine turn the switch "A" to the
position "FWD". The machine is ready to shred paper.
PAY CAREFUL ATTENTION TO THE FOLLOWING
WARNINGS PRINTED ON THE TOP OF THE MACHINE:
REFER TO THE OPERATING INSTRUCTIONS
CAUTION, MOVING PARTS
WARNING!
SAFETY PRECAUTIONS
KEEP NECK TIES OR OTHER DANGLING OBJECTS
AWAY FROM THE THROAT
DO NOT PUT YOUR HANDS IN THE THROAT
AND THE CUTTING KNIVES
DO NOT ALLOW CHILDREN
TO OPERATE THE DEVICE
KEEP LONG HAIR AWAY
FROM THE THROAT
DO NOT USE AEROSOL PRODUCTS OR
LUBRICANTS
- Automatic START / STOP
Insert the paper to be shredded in the throat "C", the
LED "D" come on and the machine automatically starts
shredding. Centre credit cards to be shredded when you
insert them in order to activate button "B".
The LED indicators automatically switch off when
the device is disconnected from the power supply;
destruction is completed by the energy accumulated
previously during the destruction cycle.
- CENTRE BUTTON "B"
The centre button "B" allows you to turn the machine on
manually in case of light and fine paper which may fail to
activate the machine.
- PAPER JAMS.
The machine will jam if a quantity of paper in excess of
the cutting capacity is inserted.
To clear the machine from a paper jam proceed as
follows:
Turn switch "A" to the " REV " position and hold it down
until the paper is all out of the throat "C".
Turn switch "A" back to the " FWD " position and insert a
smaller amount of paper to be shredded.
KOBRA HYBRID
CAUTION
5

Publicidad

loading

Este manual también es adecuado para:

S4-hybridC4-hybrid