Descargar Imprimir esta página

Kobra S6-HYBRID Instrucciones De Manejo página 6

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
IMPORTANT!
If you turn the switch "A" to the position "0" all functions
are switched off and the machine stops immediately.
To reset the automatic functions, turn switch "A" to the
"FWD" position.
You are advised to limit jams caused by inserting too
much paper and to operate the machine below maximum
capacity in order to prolong the life of the mechanical
parts and the life of the machine itself.
Continuous jams may cause breakage of the transmission
mechanisms and void the warranty.
Inserting foreign bodies or material may damage the
cutting knives and void the warranty.
CARE AND MAINTENANCE
KOBRA HYBRID shredders have no need for any specific
care or maintenance.
In any case, when you notice a considerable reduction
in cutting capacity, lubricate the cutting knives by
shredding a sheet of paper sprinkled with some drops of
oil that comes with the machine (model C4 only).
NEVER use synthetic oil, benzene based products or
aerosol lubricants of any kind inside the appliance or in
its vicinity.
Fire hazard
If you are having problems with your shredder, check the symptoms and remedies described below.
If this fails to solve the problem, contact your nearest Kobra dealer.
Never open the shredding unit or to try to repair it. You run the risk of serious electric shock and void your
warranty.
PROBLEM
The shredder does not
start
Considerable reduction
of shredding capacity
6
TROUBLESHOOTING
WHAT HAPPENS
Paper is inserted
into the throat of the
machine and it does
not start
LEDs steady on
Capacity is reduced
compared with capacity
seen when cutting kni-
ves are oiled
FIGURE 1
1
2
3
CAUSE
• Position of switch "A"
• Motor in heat protection
mode
• Power cord not
plugged in propery
• No electrical power
supply
Shred bin full
Cutting knives not oiled
KOBRA HYBRID
C
D
ACTION
• Turn the switch to " FWD"
• Wait about 15 minutes
for the engine to cool
down
• Check that the plug is
inserted into the power
socket properly
• Check that there is power
to the socket
Empty shred bin
Lubricate cutting knives
B
A
D

Publicidad

loading

Este manual también es adecuado para:

S4-hybridC4-hybrid