Hamilton Beach Commercial HBH550R Serie Manual De Operación página 2

This Operation Manual provides the user with instructions to safely operate, clean, and maintain the
Blender. It is intended to facilitate use of the Blender (referred to as "appliance"). It is mandatory that
all users in charge of installing, commissioning, operating, maintaining, repairing, or dismantling the
appliance read this manual and be properly trained for all required responsibilities. This manual must
be carefully kept at the workplace and be readily available for the user to consult.
The applicable safety, hygiene, and environmental standards/regulations enforced in the country where
appliance is operated must always be applied during use.
The declaration of conformity for this equipment is available in the Technical Support
section of our website hamiltonbeachcommercial.com.
Recycling the Product at the End of Its Service Life
The wheeled bin symbol marked on this appliance signifies that this equipment should be taken over
by a selective collection system conforming to the WEEE Directive so that it can be either recycled or
dismantled in order to reduce any impact to the environment. The user is responsible for returning the
product to the appropriate collection facility, as specified by your local code. For additional information
regarding applicable local laws, please contact the municipal facility and/or local distributor.
Motor Protection Warning
The control display includes a motor
temperature gauge light (HBH550R
Series – , HBH650R Series and
HBF600R Series –
is overheating. When light is flashing,
follow directions on page 7 to cool motor
down. If motor stops during operation due
to overheating, unplug blender and follow
Troubleshooting directions on page 7.
2
) to indicate motor
GB